Go to homepage

Cut resistant gloves, size 7, grey, SolidSafety Cut

No.: 081101-7
Cut resistant gloves, size 7, grey, SolidSafety Cut: buy cut resistant work gloves as PPE.
Cut resistant gloves, size 7, grey, SolidSafety Cut: buy cut resistant work gloves as PPE.
Cut resistant gloves, size 7, grey, SolidSafety Cut: buy cut resistant work gloves as PPE.
Cut resistant gloves, size 7, grey, SolidSafety Cut: buy cut resistant work gloves as PPE.
Size
S
Color
blue
Quality
classic
not available
PU 6
Content: 1 Pair

X,XX€*

Inhalt: XXX Stück (X,XX €* / X Stück)

Prices excl. VAT plus delivery costs

-
+

Measurement and size tables for disposable gloves, shoes, anti-slip socks and clothing


Determining the right size for disposable gloves


Why is the right size so important for disposable gloves? 

Disposable gloves that are too tight can be very uncomfortable on the hands, while disposable gloves that are too large worsen the sense of touch and thus also hinder work.

Correct determination of the size of the PPE disposable glove

PPE disposable gloves are specified in sizes 5, 6, 7, 8, 9, 10, 11 and 12. 

To determine the correct size of your disposable gloves, all you need is a flexible measuring tape and the illustration below. The correct size of your disposable gloves is important so that you can reliably carry out precise work with the disposable gloves over a longer period of time. First measure the circumference of your hand at the widest point with a tape measure. This is usually at about the level of the knuckles. The tape measure should rest on the skin, but not press against the hand or cut into the skin. 


Now read off the circumference of your hand and use the diagram to determine the appropriate glove size.





Correctly determine the size of the disposable medical glove

Medical disposable gloves are specified in sizes XS, S, M, L, XL, XXL and XXXL. 


To determine the correct size of a disposable medical glove, the width of the palm from the beginning of the index finger to the lowest point of the little finger is used. Usually, the width of the disposable glove is measured rather than the palm. 


If you are unsure or are wavering between two sizes, you can request samples in both sizes from us free of charge and without obligation. This way you can try out which size feels best on your hands and with which glove the tactile sensation is best before you decide on a box or carton in the corresponding size.





Is your disposable medical glove also a PPE glove?


Your disposable medical glove also belongs to the PPE glove category and therefore has a special regulation of dimensions. 

We have developed an individual size chart exclusively for you.




What is the European size of shoes in the US size?


Do you know how to convert US sizes to European sizes for shoes? 

Here we have created a table for you, from which you can easily read the size information for shoes.





Anti-Slip Socks Size Chart


We recommend the following anti-slip sock sizes for the following shoe sizes:





Clothing Size Chart


To determine the chest circumference, measure slightly below the armpits horizontally around the chest.

Body height is determined from the highest point of the head to the side of the foot. 




Product information "Cut resistant gloves, size 7, grey, SolidSafety Cut: buy cut resistant work gloves as PPE."

  • Item number: 081101-7
  • Manufacturer: AMPri
  • Brand: SolidSafety
  • Material: HPPE/nylon/glass/spandex yarn
  • Product category: 'Cut' cut protection glove
  • Colour: black/blue
  • Size: S (gauge: 15 gg)
  • Fit: hand specific (L/R)
  • Soft knitted cuff for good hold
  • Quality: Classic
  • Coating: nitrile microfoam (palm)
  • Can be used in these sectors: industry, close-contact services, education, government authorities and occupational safety
  • PPE category: PPE CAT II
  • Tested according to EN 388, EN 420 and ISO 21420
  • Abrasion-resistance level 4
  • Puncture-resistance level 2
  • Tear-resistance level 4
  • Special features: cut protection and mechanical protection

081101-7 Cut protection glove, Classic, S, black/blue

One moment of inattention, and you're left with a bleeding finger. Fortunately, this won't happen if you wear the 'Cut' cut protection gloves from SolidSafety. These gloves in "Classic" quality dependably protect your hands from cuts and deeper wounds. HPPE/nylon/glass/spandex yarn was used to make these gloves. The HPPE incorporated in the material has cut-resistant properties and is very hard-wearing. Thanks to the material's cooling properties, you can also wear the gloves for a long time - sweaty hands are no longer an issue. Thanks to their subtle black/blue colouring, the gloves are suitable for use in any setting. The palm of the gloves is coated with nitrile microfoam. Nitrile provides a solid grip on dry, damp and oily objects. The convenient knitted cuff protects your wrist and makes it simple to put on and remove the gloves in a hurry - a real advantage, especially if your work consists of several steps. In abrasion-resistance tests, cut protection gloves achieved level 4 - the best possible rating in line with the applicable DIN standard (scale from 0 to 4). This means the gloves are extremely abrasion-resistant. To earn this classification, the test sample must manage to make it through more than 8000 revolutions of a rotating disc equipped with emery paper. The nitrile reusable gloves earned a rating of 4 in tear-resistance tests as defined by DIN EN 388. The testing scale goes from 0 to 4; to achieve a rating of 1, the gloves must be able to withstand a tensile force of 10 Newtons or more. In puncture-resistance testing in accordance with DIN EN 388, these gloves received a rating of 2. Consequently, they provide reliable protection against sharp-edged or pointed objects.

Don't leave safety up to chance - high-quality reusable work safety gloves

As defined by the Personal Protective Equipment (PPE) Regulation, the gloves are rated as category II and protect the wearer against moderate hazards. Consequently, the gloves comply with the European and international standards EN 388, EN 420 and ISO 21420. To sum up, these 'Cut' cut protection gloves deliver excellent protective features that are further enhanced by the following characteristics: cut protection and mechanical protection. This also makes them ideal for the following sectors: industry, close-contact services, education, government authorities and occupational safety.

Size & fit

The gloves in size S have a hand-specific fit. This means that there is a left and a right glove.

Certificate: EN 420, EN ISO 21420, EN 388
Coating: Nitrile microfoam
Color: blue
Industry suitability: Education , Body-related services , Occupational safety and health , industry , authorities
Material: HPPE/Nylon/Glass/Elastane Yarn
PSA Category: PSA CAT II
Quality: classic
Size: S
Special property: Mechanical protection , Cut protection