Cut resistant gloves, size 11, grey, SolidSafety Cut High

No.: 081102-11
< 5.000 available
PU 6
Content: 1 Pair


Inhalt: XXX Stück (X,XX €* / X Stück)

Measurement and size tables for disposable gloves, shoes, anti-slip socks and clothing

Determining the right size for disposable gloves

Why is the right size so important for disposable gloves? 

Disposable gloves that are too tight can be very uncomfortable on the hands, while disposable gloves that are too large worsen the sense of touch and thus also hinder work.

Correct determination of the size of the PPE disposable glove

PPE disposable gloves are specified in sizes 5, 6, 7, 8, 9, 10, 11 and 12. 

To determine the correct size of your disposable gloves, all you need is a flexible measuring tape and the illustration below. The correct size of your disposable gloves is important so that you can reliably carry out precise work with the disposable gloves over a longer period of time. First measure the circumference of your hand at the widest point with a tape measure. This is usually at about the level of the knuckles. The tape measure should rest on the skin, but not press against the hand or cut into the skin. 

Now read off the circumference of your hand and use the diagram to determine the appropriate glove size.

Correctly determine the size of the disposable medical glove

Medical disposable gloves are specified in sizes XS, S, M, L, XL, XXL and XXXL. 

To determine the correct size of a disposable medical glove, the width of the palm from the beginning of the index finger to the lowest point of the little finger is used. Usually, the width of the disposable glove is measured rather than the palm. 

If you are unsure or are wavering between two sizes, you can request samples in both sizes from us free of charge and without obligation. This way you can try out which size feels best on your hands and with which glove the tactile sensation is best before you decide on a box or carton in the corresponding size.

Is your disposable medical glove also a PPE glove?

Your disposable medical glove also belongs to the PPE glove category and therefore has a special regulation of dimensions. 

We have developed an individual size chart exclusively for you.

What is the European size of shoes in the US size?

Do you know how to convert US sizes to European sizes for shoes? 

Here we have created a table for you, from which you can easily read the size information for shoes.

Anti-Slip Socks Size Chart

We recommend the following anti-slip sock sizes for the following shoe sizes:

Clothing Size Chart

To determine the chest circumference, measure slightly below the armpits horizontally around the chest.

Body height is determined from the highest point of the head to the side of the foot. 

Product information "Cut resistant gloves, size 11, grey, SolidSafety Cut High: buy cut resistant work gloves as PPE."

  • Item number: 081102-11
  • Manufacturer: AMPri
  • Brand: SolidSafety
  • Material: HPPE/steel/glass/polyester/spandex yarn
  • Product category: 'Cut' cut protection glove
  • Colour: grey
  • Size: XXL
  • Fit: hand specific (L/R)
  • Comfortable knitted cuff for good hold
  • Quality: Classic
  • Coating: polyurethane (palm)
  • Approved for use in these sectors: industry, close-contact services, education, government authorities and occupational safety
  • PPE category: PPE CAT II
  • Tested in accordance with EN 388, EN 420 and ISO 21420
  • Abrasion-resistance level 4
  • Puncture-resistance level 4
  • Tear-resistance level 4
  • Unique features: cut protection and mechanical protection

081102-11 Work safety gloves from SolidSafety in grey (size XXL)

Like a bodyguard for your hands: the 'Cut' cut protection gloves from SolidSafety are always there to protect your fingers whenever your attention briefly wanders as you use a sharp object - they prevent the worst from happening. Thanks to their durable material, the gloves in "Classic" quality keep your hands safe from cuts and deep wounds. HPPE/steel/glass/polyester/spandex yarn was used for these gloves. The HPPE contained in the material has cut-resistant properties and is extremely tear-resistant. The material's cooling properties also mean that you can wear the gloves for extended periods of time - sweaty hands are a thing of the past. Thanks to their subtle grey colouring, the gloves are appropriate for use in any setting. The coating consists of polyurethane which is applied to the palm. The advantage of PU is that it can be applied very thinly, which allows you to wear this glove for tasks requiring fine motor skills. Also, the hard-wearing and long-lasting material delivers a firm grip on dry objects. Thanks to the knitted cuff, your wrist also stays protected, and you can put the gloves on and take them off again in a hurry. In abrasion-resistance tests, reusable work safety gloves achieved level 4 - the best possible rating in line with the applicable DIN standard (scale from 0 to 4). This means the gloves are exceptionally abrasion-resistant. To achieve this classification, the test sample must manage to survive more than 8000 revolutions of a rotating disc covered in sandpaper. The polyurethane coating gloves earned a rating of 4 in tear-resistance testing in line with the parameters of DIN EN 388. The testing scale ranges from 0 to 4; to earn a rating of 1, the product must be able to withstand a tensile force of 10 Newtons or more. These gloves boast a class 4 puncture-resistance rating and offer outstanding protection against sharp-edged or pointed objects. In the tests conducted, a nail needed a force greater than 150 Newtons to puncture the material.

Don't leave safety up to chance - high-quality polyurethane coated gloves

'Cut' cut protection gloves are classified as category II in the categorisation of personal protective equipment (PPE). This means that they offer protection against moderately severe risks. Consequently, the gloves comply with the European and international standards EN 388, EN 420 and ISO 21420. On the whole, these 'Cut' cut protection gloves deliver reliable protective features that are further bolstered by the following characteristics: cut protection and mechanical protection. This also makes them ideal for the following sectors: industry, close-contact services, education, government authorities and occupational safety.

Size & fit

The cut protection gloves are available in size XXL and the fit is hand-specific (one left glove and one right glove).

Certificate: EN 420, EN ISO 21420, EN 388
Coating: Polyurethane
Color: grey
Colorvariation: grey
Industry suitability: Education , Body-related services , Occupational safety and health , industry , authorities
Material: HPPE/Stahl/Glas/Polyester/Elasthan-Garn
PSA Category: PSA CAT II
Quality: classic
Size: XXL
Special property: Sanitized , Mechanical protection , Cut protection