Go to homepage

Cut resistant gloves, size 7, grey, SolidSafety Cut High

Item no.: 081102-7
Size
S
Coating
Polyurethane
Quality
classic
< 5.000 available
PU 6
Content: 1 Pair

X,XX€*

Inhalt: XXX Stück (X,XX €* / X Stück)

Prices excl. VAT plus delivery costs

-
+
Certificate: EN 420, EN ISO 21420, EN 388
Coating: Polyurethane
Colorvariation: grey
Industry suitability: education, body-related services, occupational safety, industry, authorities
Material: HPPE/Stahl/Glas/Polyester/Elasthan-Garn
PSA Category: PSA CAT II
Quality: classic
Size: S
Special property: Sanitized, Mechanical protection, Cut protection

Measurement and size tables for disposable gloves, shoes, anti-slip socks and clothing


Determining the right size for disposable gloves


Why is the right size so important for disposable gloves? 

Disposable gloves that are too tight can be very uncomfortable on the hands, while disposable gloves that are too large worsen the sense of touch and thus also hinder work.

Correct determination of the size of the PPE disposable glove

PPE disposable gloves are specified in sizes 5, 6, 7, 8, 9, 10, 11 and 12. 

To determine the correct size of your disposable gloves, all you need is a flexible measuring tape and the illustration below. The correct size of your disposable gloves is important so that you can reliably carry out precise work with the disposable gloves over a longer period of time. First measure the circumference of your hand at the widest point with a tape measure. This is usually at about the level of the knuckles. The tape measure should rest on the skin, but not press against the hand or cut into the skin. 


Now read off the circumference of your hand and use the diagram to determine the appropriate glove size.





Correctly determine the size of the disposable medical glove

Medical disposable gloves are specified in sizes XS, S, M, L, XL, XXL and XXXL. 


To determine the correct size of a disposable medical glove, the width of the palm from the beginning of the index finger to the lowest point of the little finger is used. Usually, the width of the disposable glove is measured rather than the palm. 


If you are unsure or are wavering between two sizes, you can request samples in both sizes from us free of charge and without obligation. This way you can try out which size feels best on your hands and with which glove the tactile sensation is best before you decide on a box or carton in the corresponding size.





Is your disposable medical glove also a PPE glove?


Your disposable medical glove also belongs to the PPE glove category and therefore has a special regulation of dimensions. 

We have developed an individual size chart exclusively for you.




What is the European size of shoes in the US size?


Do you know how to convert US sizes to European sizes for shoes? 

Here we have created a table for you, from which you can easily read the size information for shoes.





Anti-Slip Socks Size Chart


We recommend the following anti-slip sock sizes for the following shoe sizes:





Clothing Size Chart


To determine the chest circumference, measure slightly below the armpits horizontally around the chest.

Body height is determined from the highest point of the head to the side of the foot. 




Manufacturer / Responsible Person Information

Manufacturer: AMPri Handelsgesellschaft mbH, Benzstraße 16, 21423 Winsen (Luhe), info@ampri.de
Responsible Person:

Product information "Cut resistant gloves, size 7, grey, SolidSafety Cut High: buy cut resistant work gloves as PPE."

  • Item number: 081102-7
  • Manufacturer: AMPri
  • Brand: SolidSafety
  • Material: HPPE/steel/glass/polyester/spandex yarn
  • Product category: 'Cut' cut protection glove
  • Colour: grey
  • Size: S
  • Fit: hand specific (L/R)
  • Soft knitted cuff for reliable hold
  • Quality: Classic
  • Coating: polyurethane (palm)
  • Approved for use in the following sectors: industry, close-contact services, education, government authorities and occupational safety
  • PPE category: PPE CAT II
  • Tested in line with EN 388, EN 420 and ISO 21420
  • Abrasion-resistance level 4
  • Puncture-resistance level 4
  • Tear-resistance level 4
  • Special features: cut protection and mechanical protection

081102-7 Cut protection glove, Classic, S, grey

Like a bodyguard for your hands: the 'Cut' cut protection gloves from SolidSafety are always there to keep your hands safe whenever you are momentarily distracted as you use a sharp object - they can help you avoid a serious accident. Thanks to their hard-wearing material, the gloves in "Classic" quality protect your hands from cuts and deep wounds. The gloves are made of HPPE/steel/glass/polyester/spandex yarn. As a result of its very even surface, HPPE has cut-resistant properties and is very durable. It also has a cooling effect, which is a real advantage, particularly when worn for extended periods of time. With their grey colouring, the gloves are subtle enough to use anywhere. Polyurethane was used as the material for the coating. The selling point of polyurethane is that it can be applied very thinly, which facilitates delicate work and a firm grip. It is also sturdy and built to last. The functional knitted cuff keeps your wrist safe and makes it simple to pull the gloves on and off rapidly - a major advantage, especially if your work consists of several steps. In abrasion-resistance tests, reusable polyurethane coated gloves achieved level 4 - the highest possible rating in accordance with the relevant DIN standard (scale from 0 to 4). This means the gloves are extremely abrasion-resistant. To earn this classification, the test sample must be able to survive more than 8000 revolutions of a rotating disc equipped with emery paper. In terms of tear resistance, the gloves earned a rating of 4 (scale of 0 to 4). For a rating of 1, the gloves have to resist a tensile force of 10 Newtons or more during the testing process. These gloves have a class 4 puncture-resistance rating and offer first-rate protection against sharp-edged or pointed objects. In the tests conducted, a nail needed a force of more than 150 Newtons to puncture the glove.

Don't take a chance on safety: opt for proven high-quality reusable work safety gloves.

Cut protection gloves are rated as category II in the categorisation of personal protective equipment (PPE). This means that they provide protection against moderate hazards. Consequently, the gloves comply with the European and international standards EN 388, EN 420 and ISO 21420. These gloves deliver good protection, which is further bolstered by the following special features:cut protection and mechanical protection. With these properties, they are suitable for these sectors: industry, close-contact services, education, government authorities and occupational safety.

Fit & size

The gloves in size S have a hand-specific fit. This means that there is a left and a right glove.
File Category Size Filetype Prio
081102_tds_de_10_2022_revision03 Technical data sheet (TDS) 314.55 KB pdf
081102_tds_de_09_2021_revision01 Technical data sheet (TDS) 581.76 KB pdf
081102_doc_07_2020_01_revision04 Declaration of Conformity 647.59 KB pdf
081102_2000px_32 Product images (High resolution) 1.29 MB png
081102_2000px_31 Product images (High resolution) 1.57 MB png