Go to homepage

Cut resistant glove, size 10, grey, SolidSafety Cut light

Item no.: 081105-10
Size
XL
Coating
Polyurethane
Material
HPPE
Quality
classic
on request
PU 12
Content: 1 Pair

X,XX€*

Inhalt: XXX Stück (X,XX €* / X Stück)

Prices excl. VAT plus delivery costs

-
+
Certificate: EN 420, EN ISO 21420, EN 388
Coating: Polyurethane
Colorvariation: blue
Industry suitability: education, body-related services, occupational safety, industry, authorities
Material: HPPE
PSA Category: PSA CAT II
Quality: classic
Size: XL
Special property: Sanitized, GREEN Production, Mechanical protection, breathable, Cut protection

Measurement and size tables for disposable gloves, shoes, anti-slip socks and clothing


Determining the right size for disposable gloves


Why is the right size so important for disposable gloves? 

Disposable gloves that are too tight can be very uncomfortable on the hands, while disposable gloves that are too large worsen the sense of touch and thus also hinder work.

Correct determination of the size of the PPE disposable glove

PPE disposable gloves are specified in sizes 5, 6, 7, 8, 9, 10, 11 and 12. 

To determine the correct size of your disposable gloves, all you need is a flexible measuring tape and the illustration below. The correct size of your disposable gloves is important so that you can reliably carry out precise work with the disposable gloves over a longer period of time. First measure the circumference of your hand at the widest point with a tape measure. This is usually at about the level of the knuckles. The tape measure should rest on the skin, but not press against the hand or cut into the skin. 


Now read off the circumference of your hand and use the diagram to determine the appropriate glove size.





Correctly determine the size of the disposable medical glove

Medical disposable gloves are specified in sizes XS, S, M, L, XL, XXL and XXXL. 


To determine the correct size of a disposable medical glove, the width of the palm from the beginning of the index finger to the lowest point of the little finger is used. Usually, the width of the disposable glove is measured rather than the palm. 


If you are unsure or are wavering between two sizes, you can request samples in both sizes from us free of charge and without obligation. This way you can try out which size feels best on your hands and with which glove the tactile sensation is best before you decide on a box or carton in the corresponding size.





Is your disposable medical glove also a PPE glove?


Your disposable medical glove also belongs to the PPE glove category and therefore has a special regulation of dimensions. 

We have developed an individual size chart exclusively for you.




What is the European size of shoes in the US size?


Do you know how to convert US sizes to European sizes for shoes? 

Here we have created a table for you, from which you can easily read the size information for shoes.





Anti-Slip Socks Size Chart


We recommend the following anti-slip sock sizes for the following shoe sizes:





Clothing Size Chart


To determine the chest circumference, measure slightly below the armpits horizontally around the chest.

Body height is determined from the highest point of the head to the side of the foot. 




Manufacturer / Responsible Person Information

Manufacturer: AMPri Handelsgesellschaft mbH, Benzstraße 16, 21423 Winsen (Luhe), info@ampri.de
Responsible Person:

Product information "Cut resistant glove, size 10, grey, SolidSafety Cut light: buy cut resistant work gloves as PPE."

  • Item number: 081105-10
  • Manufacturer: AMPri
  • Brand: SolidSafety
  • Material: HPPE
  • Product category: 'Cut' cut protection glove
  • Colour: grey/blue
  • Size: XL
  • Fit: hand specific (L/R)
  • Soft knitted cuff for reliable hold
  • Quality: Classic
  • Coating: polyurethane (palm)
  • Approved for use in these sectors: industry, close-contact services, education, government authorities and occupational safety
  • PPE category: PPE CAT II
  • Tested in line with EN 388, EN 420 and ISO 21420
  • Abrasion-resistance level 3
  • Puncture-resistance level 2
  • Tear-resistance level 4
  • Special features: cut protection, mechanical protection, breathability, GREEN Production and Sanitized®

081105-10 SolidSafety 'Cut' cut protection glove, Classic, in size XL (grey/blue)

The cut protection gloves from SolidSafety in "Classic" quality reliably keep your fingers safe. HPPE was selected as the material for these gloves. The HPPE lends the material cut-resistant properties, and it is also extremely tear-resistant. Thanks to their subtle grey/blue colouring, the gloves are appropriate for use in any setting. Polyurethane was used as the material for the coating. The advantage of polyurethane is that it can be applied very thinly, which allows for tactile sensitivity and a firm grip. It is also hard-wearing and long-lasting. Rapidly put on and remove the cut protection gloves thanks to the practical knitted cuff. The reusable work safety gloves were subjected to abrasion-resistance testing and achieved level 3, which means the product is considered very abrasion-resistant. By way of comparison: level 2 in this test must last for up to 1999 revolutions of a rotating disc covered with sandpaper. Gloves rated level 3 have to make it through up to 7999 revolutions. In terms of tear resistance, the gloves earned a rating of 4 (the scale ranges from 0 to 4). For a rating of 1, the gloves have to resist a tensile force of 10 Newtons or more during the testing procedure. The cut protection gloves garnered a rating of 2 in DIN EN 388 puncture-resistance tests, so the material has the capacity to withstand a sharp object like a carpenter's nail.

Tested for even better safety: Work safety gloves in compliance with EN 388, EN 420 and ISO 21420.

Cut protection gloves are classified as category II in the categorisation of personal protective equipment (PPE). This means that they protect against moderately severe risks. Consequently, the gloves comply with the European and international standards EN 388, EN 420 and ISO 21420. The gloves are treated with the Sanitized® hygiene function, which makes an important contribution to hygiene and odour management. The treatment with Sanitized® additives has a permanent effect on the safety and hygiene of the gloves by reducing the growth of pathogens, particularly when the gloves are reused. These characteristics make them ideal for the following sectors in particular: industry, close-contact services, education, government authorities and occupational safety.

Size and fit

The gloves in size XL have a hand-specific fit. This means that there is one left glove and one right glove.
File Category Size Filetype Prio
081105_tds_de_09_2021_revision01 Technical data sheet (TDS) 507.60 KB pdf
081105_doc_sv_02_2020_01_revision01 Declaration of Conformity 494.73 KB pdf
081105_doc_sl_02_2020_01_revision01 Declaration of Conformity 497.70 KB pdf
081105_doc_sk_02_2020_01_revision01 Declaration of Conformity 499.23 KB pdf
081105_doc_ro_02_2020_01_revision01 Declaration of Conformity 497.93 KB pdf
081105_doc_pt_02_2020_01_revision01 Declaration of Conformity 498.67 KB pdf
081105_doc_pl_02_2020_01_revision01 Declaration of Conformity 499.86 KB pdf
081105_doc_nl_02_2020_01_revision01 Declaration of Conformity 497.33 KB pdf
081105_doc_lv_02_2020_01_revision01 Declaration of Conformity 497.50 KB pdf
081105_doc_lt_02_2020_01_revision01 Declaration of Conformity 500.29 KB pdf
081105_doc_it_02_2020_01_revision01 Declaration of Conformity 495.36 KB pdf
081105_doc_hu_02_2020_01_revision01 Declaration of Conformity 500.30 KB pdf
081105_doc_hr_02_2020_01_revision01 Declaration of Conformity 497.35 KB pdf
081105_doc_fr_02_2020_01_revision01 Declaration of Conformity 497.21 KB pdf
081105_doc_fi_02_2020_01_revision01 Declaration of Conformity 491.32 KB pdf
081105_doc_et_02_2020_01_revision01 Declaration of Conformity 490.43 KB pdf
081105_doc_es_02_2020_01_revision01 Declaration of Conformity 496.61 KB pdf
081105_doc_en_02_2020_01_revision01 Declaration of Conformity 495.98 KB pdf
081105_doc_el_02_2020_01_revision01 Declaration of Conformity 500.86 KB pdf
081105_doc_de_02_2020_01_revision01 Declaration of Conformity 498.58 KB pdf
081105_doc_da_02_2020_01_revision01 Declaration of Conformity 496.73 KB pdf
081105_doc_cz_02_2020_01_revision01 Declaration of Conformity 498.16 KB pdf
081105_doc_bg_02_2020_01_revision01 Declaration of Conformity 493.53 KB pdf
081105_2000px_10 Product images (High resolution) 1.64 MB png