Go to homepage

Assembly glove, size 9, grey, SolidSafety Tough Micro Touch

Item no.: 081206-9
Size
L
Quality
premium
< 5.000 available
PU 12
Content: 1 Pair

X,XX€*

Inhalt: XXX Stück (X,XX €* / X Stück)

Prices excl. VAT plus delivery costs

-
+
Certificate: EN 420, EN 407, EN ISO 21420, EN 388
Coating: Nitrile
Colorvariation: grey
Industry suitability: education, body-related services, occupational safety, industry, authorities
Material: Nylon/spandex
PSA Category: PSA CAT II
Quality: premium
Size: L

Measurement and size tables for disposable gloves, shoes, anti-slip socks and clothing


Determining the right size for disposable gloves


Why is the right size so important for disposable gloves? 

Disposable gloves that are too tight can be very uncomfortable on the hands, while disposable gloves that are too large worsen the sense of touch and thus also hinder work.

Correct determination of the size of the PPE disposable glove

PPE disposable gloves are specified in sizes 5, 6, 7, 8, 9, 10, 11 and 12. 

To determine the correct size of your disposable gloves, all you need is a flexible measuring tape and the illustration below. The correct size of your disposable gloves is important so that you can reliably carry out precise work with the disposable gloves over a longer period of time. First measure the circumference of your hand at the widest point with a tape measure. This is usually at about the level of the knuckles. The tape measure should rest on the skin, but not press against the hand or cut into the skin. 


Now read off the circumference of your hand and use the diagram to determine the appropriate glove size.





Correctly determine the size of the disposable medical glove

Medical disposable gloves are specified in sizes XS, S, M, L, XL, XXL and XXXL. 


To determine the correct size of a disposable medical glove, the width of the palm from the beginning of the index finger to the lowest point of the little finger is used. Usually, the width of the disposable glove is measured rather than the palm. 


If you are unsure or are wavering between two sizes, you can request samples in both sizes from us free of charge and without obligation. This way you can try out which size feels best on your hands and with which glove the tactile sensation is best before you decide on a box or carton in the corresponding size.





Is your disposable medical glove also a PPE glove?


Your disposable medical glove also belongs to the PPE glove category and therefore has a special regulation of dimensions. 

We have developed an individual size chart exclusively for you.




What is the European size of shoes in the US size?


Do you know how to convert US sizes to European sizes for shoes? 

Here we have created a table for you, from which you can easily read the size information for shoes.





Anti-Slip Socks Size Chart


We recommend the following anti-slip sock sizes for the following shoe sizes:





Clothing Size Chart


To determine the chest circumference, measure slightly below the armpits horizontally around the chest.

Body height is determined from the highest point of the head to the side of the foot. 




Manufacturer / Responsible Person Information

Manufacturer: AMPri Handelsgesellschaft mbH, Benzstraße 16, 21423 Winsen (Luhe), info@ampri.de
Responsible Person:

Product information "Assembly glove, size 9, grey, SolidSafety Tough Micro Touch: buy ultralight industrial safety glove as PPE."

  • Item number: 081206-9
  • Manufacturer: AMPri
  • Brand: SolidSafety
  • Material: Nylon/spandex
  • Product category: assembly glove
  • Colour: grey
  • Size: L
  • Fit: hand specific (L/R)
  • Quality: Premium
  • Coating: nitrile (palm)
  • Approved for use in these sectors: industry, close-contact services, education, government authorities and occupational safety
  • PPE category: PPE CAT II
  • Tested according to EN 388, EN 407, EN 420 and ISO 21420
  • Abrasion-resistance level 3
  • Puncture-resistance level 1
  • Tear-resistance level 2
  • Special features: mechanical protection

081206-9 Assembly glove, Premium, L, grey

The assembly gloves from SolidSafety offer the best possible protection and feel very pleasant to wear. The gloves come in "Premium" quality. AMPri exclusively sells products of a very consistent "Basic" standard of quality, a more upmarket "Classic" quality or impressive "Premium" quality. Nylon/spandex was used to manufacture these gloves. Nylon offers the benefit of making gloves especially supple, guaranteeing an excellent fit with good tactile sensitivity. With their grey colouring, the gloves are subtle enough to use anywhere. Thanks to the nitrile coating on the palm, the gloves provide a very firm grip on dry objects, as well as on wet or slightly greasy ones. The reusable work safety gloves were tested for abrasion resistance and were categorised as level 3, which means the product is considered very abrasion-resistant. By way of comparison: level 2 in this test must last for up to 1999 revolutions of a rotating disc covered with sandpaper. Gloves classified as level 3 have to make it through up to 7999 revolutions. The assembly gloves achieved a rating of 2 in tear-resistance testing in accordance with DIN EN 388. The testing scale ranges from 0 to 4; to earn a rating of 1, the gloves has to resist a tensile force of 10 Newtons or more. This glove has received a rating of 1 in puncture-resistance tests as defined by DIN EN 388, which indicates a lower puncture resistance. For this test, a nail is pressed onto the glove at varying levels of force. Gloves with a rating of 0 need to be able to withstand a force of 0 to 20 Newtons; for a rating of 1, that number increases to 20 to 60 Newtons.

Repeatedly tested: Reusable gloves that comply with EN 388, EN 407, EN 420 and ISO 21420.

According to the Personal Protective Equipment (PPE) Regulation, the gloves are rated as category II and protect the user against moderately severe risks. Consequently, the gloves are in line with the European and international standards EN 388, EN 407, EN 420 and ISO 21420. It is abundantly clear that these nitrile gloves offer reliable protection. Along with the features already mentioned, they also offer the following feature: mechanical protection. This also makes them ideal for the following sectors: industry, close-contact services, education, government authorities and occupational safety.

Fit & size

The reusable gloves are available in a hand-specific fit (one left and one right glove) and in size L.
File Category Size Filetype Prio
081206_tds_en_10_2022_revision02 Technisches Datenblatt 310.75 KB pdf
081206_tds_de_10_2022_revision02 Technisches Datenblatt 316.05 KB pdf
081206_doc_sv_11_2019_01_revision01 Konformitätserklärung 495.91 KB pdf
081206_doc_sl_11_2019_01_revision01 Konformitätserklärung 499.99 KB pdf
081206_doc_sk_11_2019_01_revision01 Konformitätserklärung 501.43 KB pdf
081206_doc_ro_11_2019_01_revision01 Konformitätserklärung 496.98 KB pdf
081206_doc_pt_11_2019_01_revision01 Konformitätserklärung 498.43 KB pdf
081206_doc_pl_11_2019_01_revision01 Konformitätserklärung 502.65 KB pdf
081206_doc_nl_11_2019_01_revision01 Konformitätserklärung 497.90 KB pdf
081206_doc_lv_11_2019_01_revision01 Konformitätserklärung 501.68 KB pdf
081206_doc_lt_11_2019_01_revision01 Konformitätserklärung 503.16 KB pdf
081206_doc_it_11_2019_01_revision01 Konformitätserklärung 494.72 KB pdf
081206_doc_hu_11_2019_01_revision01 Konformitätserklärung 499.73 KB pdf
081206_doc_hr_11_2019_01_revision01 Konformitätserklärung 500.54 KB pdf
081206_doc_fr_11_2019_01_revision01 Konformitätserklärung 496.56 KB pdf
081206_doc_fi_11_2019_01_revision01 Konformitätserklärung 494.54 KB pdf
081206_doc_et_11_2019_01_revision01 Konformitätserklärung 493.51 KB pdf
081206_doc_es_11_2019_01_revision01 Konformitätserklärung 495.93 KB pdf
081206_doc_en_11_2019_01_revision01 Konformitätserklärung 495.07 KB pdf
081206_doc_el_11_2019_01_revision01 Konformitätserklärung 504.42 KB pdf
081206_doc_de_11_2019_01_revision01 Konformitätserklärung 498.01 KB pdf
081206_doc_da_11_2019_01_revision01 Konformitätserklärung 496.26 KB pdf
081206_doc_cz_11_2019_01_revision01 Konformitätserklärung 501.15 KB pdf
081206_doc_bg_11_2019_01_revision01 Konformitätserklärung 495.76 KB pdf
081206_2000px_33 Produktbilder (Hochauflösend) 2.24 MB png
081206_2000px_32 Produktbilder (Hochauflösend) 1.43 MB png
081206_2000px_31 Produktbilder (Hochauflösend) 1.23 MB png
081206_2000px_30 Produktbilder (Hochauflösend) 3.03 MB png