Assembly glove, size 7, grey, SolidSafety Tough Micro Touch

No.: 081206-7
< 5.000 available
PU 12
Content: 1 Pair


Inhalt: XXX Stück (X,XX €* / X Stück)

Measurement and size tables for disposable gloves, shoes, anti-slip socks and clothing

Determining the right size for disposable gloves

Why is the right size so important for disposable gloves? 

Disposable gloves that are too tight can be very uncomfortable on the hands, while disposable gloves that are too large worsen the sense of touch and thus also hinder work.

Correct determination of the size of the PPE disposable glove

PPE disposable gloves are specified in sizes 5, 6, 7, 8, 9, 10, 11 and 12. 

To determine the correct size of your disposable gloves, all you need is a flexible measuring tape and the illustration below. The correct size of your disposable gloves is important so that you can reliably carry out precise work with the disposable gloves over a longer period of time. First measure the circumference of your hand at the widest point with a tape measure. This is usually at about the level of the knuckles. The tape measure should rest on the skin, but not press against the hand or cut into the skin. 

Now read off the circumference of your hand and use the diagram to determine the appropriate glove size.

Correctly determine the size of the disposable medical glove

Medical disposable gloves are specified in sizes XS, S, M, L, XL, XXL and XXXL. 

To determine the correct size of a disposable medical glove, the width of the palm from the beginning of the index finger to the lowest point of the little finger is used. Usually, the width of the disposable glove is measured rather than the palm. 

If you are unsure or are wavering between two sizes, you can request samples in both sizes from us free of charge and without obligation. This way you can try out which size feels best on your hands and with which glove the tactile sensation is best before you decide on a box or carton in the corresponding size.

Is your disposable medical glove also a PPE glove?

Your disposable medical glove also belongs to the PPE glove category and therefore has a special regulation of dimensions. 

We have developed an individual size chart exclusively for you.

What is the European size of shoes in the US size?

Do you know how to convert US sizes to European sizes for shoes? 

Here we have created a table for you, from which you can easily read the size information for shoes.

Anti-Slip Socks Size Chart

We recommend the following anti-slip sock sizes for the following shoe sizes:

Clothing Size Chart

To determine the chest circumference, measure slightly below the armpits horizontally around the chest.

Body height is determined from the highest point of the head to the side of the foot. 

Product information "Assembly glove, size 7, grey, SolidSafety Tough Micro Touch: buy ultralight industrial safety glove as PPE."

  • Item number: 081206-7
  • Manufacturer: AMPri
  • Brand: SolidSafety
  • Material: Nylon/spandex
  • Product category: 'Tough' assembly glove
  • Colour: grey
  • Size: S
  • Fit: hand specific (L/R)
  • Quality: Premium
  • Coating: nitrile (palm)
  • Suitable for use in these sectors: industry, close-contact services, education, government authorities and occupational safety
  • PPE category: PPE CAT II
  • Tested in accordance with EN 388, EN 407, EN 420 and ISO 21420
  • Abrasion-resistance level 3
  • Puncture-resistance level 1
  • Tear-resistance level 2
  • Unique features: mechanical protection

081206-7 'Tough' assembly glove, Premium, S, grey

Work safely: the assembly gloves from SolidSafety in "premium" quality keep you out of harm's way whilst still allowing you to complete tasks that demand a dextrous touch. Nylon/spandex was used to make these gloves. Nylon offers the benefit of making gloves especially stretchy, which ensures a great fit with good tactile sensitivity. Thanks to their unobtrusive grey colouring, the gloves are suitable for use in any setting. The coating material also turns the gloves into true all-rounders: the nitrile on the palm guarantees that you always get a very reliable grip - no matter whether the objects are dry, damp or slightly greasy. The assembly gloves were subjected to abrasion-resistance testing and were categorised as level 3, which means the product is considered highly abrasion-resistant. By way of comparison: level 2 in this test must withstand up to 1999 revolutions of a rotating disc coated with emery paper. Gloves rated level 3 have to make it through up to 7999 revolutions. In tear-resistance testing as defined by DIN EN 388, the product earned a 2 (on a scale of 0 to 4). The protective gloves have a level 1 in puncture-resistence testing. In specific terms, this means that the gloves can resist a nail attempting to pierce through the material with an applied force of between 20 and 60 Newtons.

Repeatedly tested: Reusable gloves in line with EN 388, EN 407, EN 420 and ISO 21420.

The gloves are rated as category II personal protective equipment (PPE), meaning that they keep the wearer safe from moderate hazards. Consequently, the gloves are in compliance with the European and international standards EN 388, EN 407, EN 420 and ISO 21420. All in all, it is obvious these reusable work safety gloves are capable of dependably protecting you from hazards. But they also offer one other special characteristic: mechanical protection. With these features, they are suitable for the following sectors: industry, close-contact services, education, government authorities and occupational safety.

Fit & size

The reusable gloves come in a hand-specific fit (one left and one right glove) and in size S.

Certificate: EN 420, EN 407, EN ISO 21420, EN 388
Coating: Nitrile
Color: grey
Industry suitability: Education , Body-related services , Occupational safety and health , industry , authorities
Material: Nylon/spandex
PSA Category: PSA CAT II
Quality: premium
Size: S